Difference between revisions of "Turning the edgertronic camera on and off"
(Created page with "The edgertronic camera power requirements are as follows: 12 VDC @ 1.5A<br> 2.5/5/5mm center positive coaxial jack accepts standard and locking plugs The following are appro...") |
|||
| Line 2: | Line 2: | ||
12 VDC @ 1.5A<br> | 12 VDC @ 1.5A<br> | ||
| − | 2.5/5/5mm center positive coaxial jack | + | 2.5/5/5mm center positive coaxial jack |
The following are approved power supplies:<br> | The following are approved power supplies:<br> | ||
Revision as of 18:36, 7 August 2013
The edgertronic camera power requirements are as follows:
12 VDC @ 1.5A
2.5/5/5mm center positive coaxial jack
The following are approved power supplies:
120V AC DC Adapter: 12V 1.5A SL Power MENB1020A1203F01
Car Adapter: 12V 5A MPD ZA5074-2.5
Portable Battery Pack Bescor MM-12ATM
Damage to the camera due to reversed polarity, incorrect voltage or incompatible power sources is NOT covered under warrantee.
Than said, should you feel the need to make your own cable, you can use the following locking plug at your own risk:
Switchcraft 761K
