Difference between revisions of "Turning the edgertronic camera on and off"

From edgertronic high speed video camera
Jump to: navigation, search
Line 1: Line 1:
 
The edgertronic camera power requirements are as follows:
 
The edgertronic camera power requirements are as follows:
  
12 VDC @ 1.5A<br>
+
* 12 VDC @ 1.5A
2.5/5/5mm center positive coaxial jack
+
* 2.5/5/5mm center positive coaxial jack
  
 
The following are approved power supplies:<br>
 
The following are approved power supplies:<br>
120V AC DC Adapter: 12V 1.5A SL Power MENB1020A1203F01<br>
+
* 120V AC DC Adapter: 12V 1.5A SL Power MENB1020A1203F01<br>
Car Adapter: 12V 5A MPD ZA5074-2.5<br>
+
* Car Adapter: 12V 5A MPD ZA5074-2.5<br>
Portable Battery Pack Bescor MM-12ATM<br>
+
* Portable Battery Pack Bescor MM-12ATM<br>
  
 
Damage to the camera due to reversed polarity, incorrect voltage or incompatible power sources is NOT covered under warrantee.
 
Damage to the camera due to reversed polarity, incorrect voltage or incompatible power sources is NOT covered under warrantee.

Revision as of 18:57, 7 August 2013

The edgertronic camera power requirements are as follows:

  • 12 VDC @ 1.5A
  • 2.5/5/5mm center positive coaxial jack

The following are approved power supplies:

  • 120V AC DC Adapter: 12V 1.5A SL Power MENB1020A1203F01
  • Car Adapter: 12V 5A MPD ZA5074-2.5
  • Portable Battery Pack Bescor MM-12ATM

Damage to the camera due to reversed polarity, incorrect voltage or incompatible power sources is NOT covered under warrantee.

Than said, should you feel the need to make your own cable, you can use the following locking plug at your own risk:
Switchcraft 761K