Turning the edgertronic camera on and off

From edgertronic high speed video camera
Revision as of 17:16, 19 November 2013 by Jjohnson (talk | contribs) (warrantee -person to whom a warranty is given)
Jump to: navigation, search

The edgertronic camera power requirements are as follows:

  • 12 VDC @ 1.5A
  • 2.5/5/5mm center positive coaxial jack

The following are approved power supplies:

  • 120V AC DC Adapter: 12V 1.5A SL Power MENB1020A1203F01
  • Car Adapter: 12V 5A MPD ZA5074-2.5
  • Portable Battery Pack Bescor MM-12ATM

Damages to the camera due to reversed polarity, incorrect voltage or incompatible power sources are NOT covered under warranty.

That said, should you feel the need to make your own cable, you can use the following locking plug at your own risk:
Switchcraft 761K