Turning the edgertronic camera on and off

From edgertronic high speed video camera
Revision as of 18:35, 7 August 2013 by 67.188.214.83 (talk) (Created page with "The edgertronic camera power requirements are as follows: 12 VDC @ 1.5A<br> 2.5/5/5mm center positive coaxial jack accepts standard and locking plugs The following are appro...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The edgertronic camera power requirements are as follows:

12 VDC @ 1.5A
2.5/5/5mm center positive coaxial jack accepts standard and locking plugs

The following are approved power supplies:
120V AC DC Adapter: 12V 1.5A SL Power MENB1020A1203F01
Car Adapter: 12V 5A MPD ZA5074-2.5
Portable Battery Pack Bescor MM-12ATM

Damage to the camera due to reversed polarity, incorrect voltage or incompatible power sources is NOT covered under warrantee.

Than said, should you feel the need to make your own cable, you can use the following locking plug at your own risk:
Switchcraft 761K