Software release version 1.3

From edgertronic high speed video camera
Jump to: navigation, search

Version 1.3

The only change was to the device update logic so you could go from version 2.x back to version 1.3.

Version details

Build host: contra-lx
Built by: tfischer
Build date: 20140730145349
Build tag: ssc1
Build hash: 1f60ed9

Release Notes

Update tarballs now include an md5sum file. To be able to go from version 2.x back to version 1.x, a version 1.3 release was needed so the update tarball includes the required md5sum files.

Resolved defects

None.

SDK API changes

None.

Known defects

The following is the list of known defect in the version 1.3 release.

201406231552 IP address reported by file on SD card is wrong if the static IP address has been manually set

You can set the camera's static IP address by manually editing the /etc/network/interfaces file. When you take the network down and back up again, the camera's address changes, but the address reported by the file on the big SD card is wrong. The System LED that reports if a static or DHCP address is used; may give the wrong indication as well.

Thanks to Craig for reporting this defect.

201406180730 Device looses some settings during device software update

Settings stored in the micro SD card read/write partition are erased during a device update. Currently only manually configured network settings are stored in the read/write partition.

201401101440 Web browser doesn't have the right aspect ratio when setting the height and width

The Web browser user interface does properly scale the live preview video images for some height and width values. The video is recorded correctly.

201312111624 File timestamp is in GMT

The camera was intentionally designed to use GMT for the timezone when saving video files. Some might consider this a defect (issue #182).

201312111442 Video file metadata has user configured duration not actual video file duration

If you trigger the camera before the pre-trigger buffer is full, the duration reported in the video file metadata is wrong (issue #181).

201312111058 When memory card is full playback and download buttons are inactive

You should be able to play the last saved video when the memory card is full, but the playback and download buttons are inactive (issue #179).

201312021613 Browser forward and back buttons may change camera settings

If you browse to another site and then use the browser back button to return to viewing the camera, your camera settings may have changed.

201311291648 Insert and remove remote trigger causes camera to trigger

If you have the camera running and insert or remove your remote trigger device, it will trigger the camera and cause a video file to be created on your storage device.

201311041114 Playing last recorded video can fail in rare cases

The camera will automatically switch which storage device is used when the current storage device fills up and another, non-full, storage device is available. You can not play the video recorded right before the switch occurs.

201311101454 CAMAPI does not detect new space on mounted storage device

CAMPI handles changes in storage status using an interrupt scheme (mdev). If your SD card is full and you telnet into the camera and delete some files, no event occurs, so CAMAPI doesn't detect there is now room and the memory full message is displayed.

Workaround: after deleting the files, remove and reinsert the storage device to create a change in storage status event.