Quick start guide

From edgertronic slow-motion video camera
Jump to: navigation, search

The steps to getting started depend on your network configuration.

Laptop connected to camera with Ethernet cable

  1. Configure host PC networking for address 10.11.12.1
  2. Enable browser video player, enable javascript, enable cookies, and set security level to allow connections to local device without going though a proxy.
  3. Attach lens
  4. Insert Secure Digital SD card - label faces outward
  5. Connect Ethernet cable between host PC and camera
  6. Connect power
  7. Wait for system LED (one farthest from power jack) to turn solid yellow
  8. Browse to camera at address http://10.11.12.13 Please use the Google Chrome browser. Firefox, Internet Explorer and Edge are NOT supported.
  9. Adjust exposure and camera settings. Can't see anything? Open up aperture and/or add brighter lights.
  10. Trigger the camera to capture video.

Computer and camera connected to existing network

  1. Enable browser video player, enable javascript, enable cookies, and set security level to allow connections to local device without going though a proxy.
  2. Attach lens
  3. Insert Secure Digital SD card - label faces outward
  4. Connect Ethernet cable between modem and camera
  5. Connect power
  6. Wait for system LED (one farthest from power jack) to be solid blue
  7. Remove the SD card and look for a file that contains the IP address of the camera, replace SD card
  8. Browse to camera's IP address. Please use the Google Chrome browser. Firefox, Internet Explorer and Edge are NOT supported.
  9. Adjust exposure and camera settings. Can't see anything? Open up aperture and/or add brighter lights.
  10. Capture video using web interface, external trigger, or multi-function button
Personal tools